7. Setting Up the DVD Player
7.1. Unpacking the Components
Remove the DVD player and accessories carefully from the packaging. Always hold the DVD player with two hands. Never let the DVD player or remote fall! This could lead to irreparable damage.
7.2.Inserting the Batteries into the Remote Control
1Open the battery compartment on the back side of the remote control.
2Remove the protective film from the two batteries of type AAA/LR03/micro included with the DVD player. Then insert both batteries into the battery compart- ment. Be sure to insert the batteries with the correct polarity. The correct polarity is indicated inside the bat- tery compartment.
3Put the battery compartment cover back in place.
ôNote:
To ensure faultless functioning of the remote control:
ÚAlways point the remote control directly at the DVD player when using it.
ÚRemain within 5 meters of the DVD player when using the remote control.
ÚMake certain that no objects obstruct the reception be- tween the remote control and the DVD player.
Otherwise, the remote control may function improperly.
7.3.Selecting a Suitable Setup Loca- tion for the DVD Player
Place the DVD player on a flat, level,
†Danger!
Do not place the DVD player ...
Úin locations that are exposed to direct sunlight. Other- wise, it may overheat and be irreparably damaged. The risk of fire exists!
Úin the immediate vicinity of heat sources. This includes ovens, fan heaters and similar devices as well as ventila- tion openings of other electronic devices. Otherwise, the DVD player may be irreparably damaged. The risk of fire exists!
Úin damp environments. Otherwise, moisture may enter the DVD player. This creates the risk of an electrical shock and a fire!
Úin the immediate vicinity of water, such as bath tubs or swimming pools. Never place containers filled with water (e.g. flower vases) on the DVD player. If water flows into the DVD player or the device falls into water, the risk of an electrical shock exists!
Do not place any open flames – such as burning candles
– on the DVD player. Otherwise, the risk of fire exists!
Warning!
Never place other devices or heavy objects (e.g. televi- sions) on the DVD player. This could lead to malfunc- tions and/or permenant damage to the DVD player!
Never place the DVD player in locations that are subject to heavy shocks or constant vibrations. This could lead to malfunctions and/or permenant damage to the DVD player!
7.4.Connecting the DVD Player to a Television
After setting up the DVD player, you can now connect it to a television. The DVD player can be connected to televi- sions with the television standards PAL, NTSC and multi- standard televisions.
ôNote:
The DVD player does not function with televisions of the television standard SECAM.
Depending on the features of the television, there are various options for connecting the DVD player to it:
7.4.1.Connecting to a Television via Scart- Cable/RGB
ôNote:
Connecting the television with a
10