Kompernass KH 6507 Required Settings on the DVD Player Before Use, Connecting via Optical Cable

Page 14

2Insert the second plug of the coaxial cable into the corresponding socket of the digital audio compo- nent.

Fig. 8 Connecting a HiFi system via coaxial cable

8.2.1.2. Connecting via Optical Cable

1Pull off the protective cover over the optical socket of the DVD player.

2Then insert the plug of the optical cable into the optical socket of the DVD player.

3Insert the second plug of the optical cable into the corresponding socket of the digital audio compo- nent.

Fig. 9 Connecting a HiFi system via optical cable

ôNote:

When connecting the optical cable, dust must not be allowed into the optical socket. This could disrupt the optical signal and cause malfunctions. Place the protecti- ve cover back onto the socket when you disconnect the optical cable!

8.2.2. Connecting via Analog Cable

If the digital audio component does not have a digital input: Connect the digital audio component to the DVD player via RCA cables. To do this:

1Insert one RCA plug each into …

Úthe FL socket

Úthe FR socket

Úthe SL socket

Úthe SR socket

Úthe Center socket and

Úthe Subwoofer socket

on the rear side of the DVD player.

Fig. 10 Connecting a HiFi system via analog cables

2Insert the RCA cables into the corresponding RCA sockets of the digital audio component.

9.Required Settings on the DVD Player Before Use

All settings on the DVD player can be configured with the remote control in the "On-Screen Display Menu". This is displayed on the television screen and is referred to below as the OSD menu.

Before using the DVD player for the first time, you must configure a few settings in this menu.

To be able to configure the required settings via the menu:

1Plug the power cable of the DVD player into a power socket

2To switch on the DVD player, press the Power button on the front side of the DVD player.

If the DVD player is already on, but is currently in standby mode: Press the standby button on the remo- te control once to switch on the DVD player.

The display of the DVD player first displays "Hello", then "Loading" and finally "NoDisc". "No Disc" is displayed on the television screen.

3Familiarise yourself with the operation of the OSD menu with the brief instructions below:

14

Image 14

Contents Operating Manual KH6507 Contents Using the DVD Player General Video Functions of the DVD Player † Danger Delivery Contents Technical DataInformation on the Display Components, Operating Elements, Connections and DisplaysFront of the Device Rear of the DeviceRemote Control Remote controlSelecting a Suitable Setup Loca- tion for the DVD Player Setting Up the DVD PlayerInserting the Batteries into the Remote Control Connecting the DVD Player to a Television Connecting a television via Scart cable / RGB On this topic, refer to . Glossary / Key Word Index Connecting a HiFi System to the DVD Player Connecting Audio Compo- nents to the DVD PlayerConnecting the DVD Player to a Video Projector Connecting Digital Audio Compo- nents to the DVD PlayerConnecting via Analog Cable Required Settings on the DVD Player Before UseConnecting via Optical Cable Configuring the Television Display Format Using the OSD MenuLanguage Settings Configuring the Television StandardConfiguring the Analog Output Configuring the Video Output / Television ModeAudio Settings SurrConfiguring the Dynamic Dolby Digital Configuring the Digital OutputConfiguring Prologic Settings for Mono VCDs/S-VCDsSpeaker Settings Setting for Hdcd Audio CDsConfiguring Nighttime Mode Configuring Speaker SizesRear Configuring the Distances from the Speaker to the ListenerCenter SubwooferActivating the Automatic Memory Function Playing a Test SoundActivating the Screen Saver Inserting Memory Cards with MP3/WMA/JPEG Files Using the DVD PlayerInserting Discs MemoryStick Memory Cards MS SmartMedia Memory Cards SMMultiMediaCard/SecureDigital Memory Cards MMC/SD Playing DVDs/VCDs/S-VCDsIf no folders are present Playing Audio CDsFollowing is shown in the display of the DVD player If folders are presentSkip Pausing PlaybackGeneral Functions During Playback Repeat Playback Fast Forward/RewindActivating Various Playback Modes Random Playback Using the Bookmark FunctionRepeating Sequences A-B For DVDs Using the Program FunctionFor Audio CDs/VCDs/S-VCDs Title/Chapter Selection with the Number Buttons Calling Up the DVD MenuStep Function Selecting Chapters with the Search Function for DVDSlow Playback Forward/Backward Zoom In / OutSpecial Functions for Audio CD Playback General Audio Functions DVD Player Activating the Spatializer Function General Video Functions of the DVD PlayerActivating the Equalizer Function Activating the Bass BoostPreferences Using the Sleep Timer FunctionOther Functions of the DVD Player Using the Kid Safe Function Adjusting the Display BrightnessSelecting Your Own Password Activating/Deactivating the Pass- word CheckSwitching the DVD Player Off Cleaning the DVD PlayerResetting the DVD Player to the Factory Settings AdultDisplay indicates No Disc, even though a disc was inserted Refer here to . Connecting the DVD Player to a TelevisionRemote control does not function Inserted disc is not playedGlossary / Key Word Index Progressive scan VideoComposite video YUV component video outAudio CDs Dolby DigitalWhat are PAL, Ntsc and SECAM? DivX