Disconnecting the dishwasher
1.Turn hot water off. (Thii can be done after the last rinse.)
2.Press the red button on the connector to release the water pressure.
3.Lift slightly on the hose connector while pulling down the looking collar. Pull down on the connector.
4.Empty any remaining water from the oonneotor by turning the connector upside down.
5.Unplug Power supply cord and return to
storage compartment. | Hose connection |
8. Return hoses to storage compartment. |
|
Electrical connection
Apowersup~lyof120vo#s,6OHzAC,l5or
20 amps, is required. Par your Personal safety, this appliance must be grounded. This a@ance is equipped with a power supply cord having a 3prong grounding Plug. To minimize possible shock hazard il must be plugged into a mating &Prong grounding tyfx wall receptacle, grounded in accordance with the National Electrical Code and local codes and ordinances. If a mating wall receptacle is not avaibble, it is the responsibility and obligation of the customer to have a properly grounded 3prong wall receptacle installed by a qualified electrician.
Fire Hazard
An extension cord should not be used with this appliance.
Do not, under any circumstances, remove the Power supply cord ground prow.
Such use may result in a fire, electrical shock, or other Personal injury.
Power 8upply
cord3-pro& grounding type wall receptacle
Converting a portable dishwasher to a built-in
Your Whirlpool Portable Dishwasher | can | be | is available | at your | Whirlpool | dealer or | ||
converted | to a | (underoounter) | model | authorized | Whirlpool | service | company. | |
by using | conversion | kit No. 4317656. | The | kit | Instructions | are included with | the kii. | |
17
