SECTION II. GETTING READY TO SEW
Connecting Machine to Power Supply
q Foot control plug | r | |
w Machine plug |
| |
e Power supply plug |
| |
r Power switch |
| |
t Power supply cord |
| |
y Foot control |
| |
Before connecting the power cord, make sure the voltage |
| |
and frequency shown on the machine conform to your |
| |
electrical power. |
| |
1. | Turn off the power switch r. |
|
2. | Insert the foot control plug q, machine plug w into the |
|
| machine. |
|
3. | Insert the power supply plug e into the outlet. |
|
4. | Turn the power switch. | y |
Before Using Your Sewing Machine
Before using your sewing machine for the first time, place a waste fabric under the presser foot and run the machine with thread for a few minutes. Wipe away any oil which may appear.
For Your Safety
*While in operation, always keep your eyes on the sewing area. Do not touch any moving parts such as the thread
*Always turn off the power switch and unplug from the power supply:
-When leaving the machine unattended.
-When attaching or removing any parts.
-When cleaning the machine.
*Do not place anything on the foot control, when not sewing.
Polarized plug
This appliance has a polarized plug (one blade wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way.
Foot Controller Model 21316 or
we
q
t
Controlling Sewing Speed
Sewing speed is varied by the foot control.
The harder you press on the foot control, the faster the machine runs.
6
