Janome MS-5027 instruction manual Section Viii. Care Of Your Machine, Replacing the Light Bulb

Models: MS-5027

1 111
Download 111 pages 41.48 Kb
Page 105
Image 105
SECTION VIII. CARE OF YOUR MACHINE

SECTION VIII. CARE OF YOUR MACHINE

NOTE:

*Unplug the machine.

*Do not dismantle the machine other than as explained in this section.

*Do not store the machine in a high-humidity area, near a heat radiator, or in direct sunlight.

*Clean the outside of the machine with a soft cloth and mild soap.

Replacing the Light Bulb

CAUTION:

As the light bulb could be HOT, protect your fingers when you handle it.

Unplug the machine and open the face cover. Pull out the bulb from the socket. Insert the new bulb into the opening of the socket. Close the face cover.

Cleaning the Bobbin Holder

1To insure that the machine operates at its best, you need to keep the bobbin area clean at all times.

Turn off the power switch and unplug the machine. Remove the hook cover plate by sliding the hook cover plate release button to the right.

2Take out the bobbin. Brush out dust and lint with a lint brush or a vacuum cleaner.

3Insert the bobbin and attach the hook cover plate.

1

2

3

98

Page 105
Image 105
Janome MS-5027 instruction manual Section Viii. Care Of Your Machine, Replacing the Light Bulb, Cleaning the Bobbin Holder