If the button is extremely thick, make a test buttonhole. If it is difficult to fit the button through the test buttonhole, lengthen the buttonhole by pulling the button holder back to create a gap 1 .
1Gap
•How to adjust buttonhole stitch density
Slide the stitch length control to adjust stitch density. Slide the stitch length control to 1 for a looser density 1 . Slide the stitch length control to 0.25 for a tighter density
2 .
If the sides of the buttonhole are not balanced, do the following:
•If the buttonhole looks like 4 , use the screwdriver to move the lever to the right (+) to make the left side of the buttonhole less dense (see illustration).
•If the buttonhole looks like 5 , use the screwdriver to move the lever to the left
6 Buttonhole pitch balance adjusting lever
4
5
R
1
21
AUTO BH
6
84
