• Removing the hook cover plate
1Hook cover plate release button
2 Hook cover plate
Slide the hook cover plate release button 1 to the right, and remove the cover plate 2 .
•Inserting the bobbin 1 End of thread
2 Notch
3 Notch
4 Threading diagram
1 Place a bobbin in the bobbin holder with the thread running off counterclockwise.
2Guide the thread into notch 2 on the front side of
the bobbin holder. Draw the thread to the left, sliding it between the tension spring blades.
3Continue to draw the thread lightly until the thread slips into notch 3 . Pull out about 6" (15.0 cm) of thread.
1
2
1
1
2
2
3
3
4
Attach the hook cover plate. Check the threading by referring to the diagram 4 shown on the hook cover plate.
4
1/8 3/8 5/8
10
4
26
