To Drop or Raise the Feed Dogs
The drop feed dogs lever is located underneath the free arm bed on the back side of the machine.
1To drop the feed dogs, push the lever in the direction of the arrow, as illustrated.
2To raise the feed dogs, push the lever in the direction of the arrow, as illustrated, and turn the handwheel toward you. Feed dogs must be up for normal sewing.
Darning
1 | Stitch selector: | 6 to 8 |
|
2 | Stitch width: | 6.5 |
|
3 | Stitch length: | Any |
|
4 | Needle thread tension: | 2 to 6 |
|
5 | Pressure adjusting lever: | 0 | 4 |
6 | Presser foot A: | Zigzag foot | |
7 | Presser foot F: | Satin stitch foot | 5 |
8 | Feed dogs: | Dropped | 4 |
|
|
| 3 |
Drop the feed dogs. Center the hole in the fabric on an embroidery hoop, as shown.
Lower the presser foot F and sew at a slow speed.
Move the fabric back and forth slowly until the darning area is covered. Turn the fabric 1/4 turn (90°), and sew another layer of stitching over the first layer. After darning is completed, return the pressure adjusting lever to 3 for normal sewing.
NOTE:
If the fabric is thin or badly damaged, use a separate piece of fabric under the hole to reinforce it.
1
2
1
5
0 1
2
3
21 
2
3
6 7 8
or o ou
50
