ECheck by means of the operating instructions for a potential connected audio component if settings to it are necessary in order to use it with the DVD player.
One or several functions can not be switched on
The selected function may not be available on all
function that is not available the symbol 
will be displayed on the television screen.
No 4:3 or 16:9 image
ACheck by means of the televisions operating in- structions, which image formats the television has at its disposal.
BCheck to see if the settings in the OSD menu match the available image format of the tele- vision.
Remote control not functioning
ACheck to make sure that the remote control batteries have been inserted into the battery compartment with the correct polarity.
BCheck to see if the remote control batteries are exhausted and, if necessary, change both batteries.
CMake sure that there are no obstacles located between the remote control and the DVD player.
DBe situated no more than five meters from the DVD player when using the remote control.
Playback language/ Subtitle language do not correspond to the settings in the OSD menu
The playback language/Subtitle language setting in the OSD menu is not available on the inserted disc.
None of the buttons on the appliance or on the re- mote control are functioning/other malfunctions
ASwitch off the DVD player by pressing the POWER button. Wait ten seconds, then press the "Power" button again once to switch the DVD player back on.
BIf the malfunction is still present: Reset the DVD player to its default settings.
Contact one of our service partners in your area if
…
•the stated function defect can not be resolved as described or
•other functional defects arise.
For this see chapter 18. "Important warranty information".
- 32 - |