Panasonic TX-68PS12A Nec, Orion Aiwa, Fujitsu Sanyo, Hitachi, Sharp JVC, Sony, Mitsubishi Toshiba

Remote Control VCR/LD/DVD Operation

Manufacturers’ Code Settings

This remote control has been designed to work with a variety of VCRs, Laser Discs and DVDs. In order for this to occur, the setting for the VCR, LD or DVD must be programmed into the Remote Control.

1.To set a VCR, push the remote control VCR Button.

To set a LD or DVD, push the remote control LD/DVD Button.

2.Push the remote control VCR or LD/DVD Power Button and keep it pressed.

3.Enter the Manufacturer’s two-digit code number using the remote control Number Buttons. (The codes are shown below).

4.Press the STOP button.

5.Release the remote control VCR or LD/DVD Power Button.

6.Check the operation of the VCR, LD or DVD. If it does not operate correctly, repeat steps 1 to 5 and use an alternate code (if there is one).

VCR CODES
Manufacturer	Code	Manufacturer	Code
Panasonic /	10, 11, 12, 13	NEC	40, 41, 42, 43
National		ORION	45, 46
AIWA	15, 16	Philips	50
FUJITSU	20	SANYO	55, 56, 57, 58
HITACHI	25, 26, 27	SHARP	60, 61
JVC	30, 31, 32	SONY	65, 66, 67
MITSUBISHI	35, 36	TOSHIBA	70, 71
LD CODES
Manufacturer	Code	Manufacturer	Code
Panasonic	10, 11, 12, 13	SAMSUNG	30
KENWOOD	15, 16	SHARP	35
PHILIPS	20	SONY	40, 41, 42, 43
PIONEER	25
DVD CODES
Manufacturer	Code
Panasonic	70

NOTES:

1.If the batteries are removed from the remote control the Manufacturer’s codes are lost and must be reprogrammed.

2.The list of manufacturer’s codes is given as a guideline only. Panasonic cannot guarantee that any other manufacturer’s product will work with this remote control.

21