Panasonic TX-68PS13A, TX-68PS12A manual Button

Remote Control Television Operation

BUTTON

WAKE UP

SURROUND

WHAT IT DOES

WAKE UP

The television can be programmed to turn itself ON after a period of time.

1.Press the Wake Up Button.

2.Press the Left ( ) or Right ( ) Buttons to set the time delay.

The Left Button will decrease the time by ten minutes each time you press it. The Right Button will increase the time by ten minutes each time you press it.

3.After setting the Wake Up Timer, switch the television to Stand-By. The power indicator will blink if the Wake Up Timer has been set correctly.

4.When the Wake Up time has elapsed, the television will turn ON.

The Off-Timer will be set to 90 minutes. “WAKE UP TIMER” and the Off-Timer will be displayed at the top of the screen. (Press any button to cancel the display).

Notes:

1.The wake up timer can be set for up to 12 hours.

2.When the Wake Up Timer turns the set on, the Off-Timer will automatically switch it off again after 90 minutes, unless it is cancelled. Press any button to cancel the Off-Timer.

3.The Wake Up Timer can be cancelled by:

switching the main power off, or

setting the timer to OFF using the Left and Right Buttons, or pressing the Normalise Button while the wake up timer On-Screen display is showing.

SURROUND

Surround sound is designed to recreate the spatial effect of a movie theatre or concert hall. It brings added depth to the sound from your television.

Pressing this button

?During Stereo broadcasts switches between “STEREO SURROUND” and “SURROUND OFF”.

?During Mono broadcasts switches between “MONO SURROUND” and “SUR- ROUND OFF”.

?In the AV Mode switches between “STEREO SURROUND” , “MONO SUR- ROUND” and “SURROUND OFF”.

OFF-TIMER

Pressing the Off-Timer allows the television to be preset to turn off after a period of time. The timer settings (in minutes) are: 30, 60 and 90.

Setting the Off-Timer to AUTO will cause the television to go into Standby five minutes after the television broadcast station you are tuned to stops transmitting.

Setting the OFF-TIMER to 0 cancels the timer operation.

12