Press ▲ or ▼ to select AUTO PRESET. Press ENTER. The TV/DVD scans all channels and memo- rizes available ones. When scanning is complete, the TV/DVD will go to the lowest available channel auto- matically.
To stop channel scanning before it is finished, press SETUP on the remote.
– CHANNEL SET UP –
ADD / DELETE CH (TV) B AUTO PRESET
3
1
Resetting TV Channels
The TV/DVD may memorize channels when you turn it on the first time. You may reset channels with these steps.
● Before you begin, press SELECT to put the
TV/DVD in TV mode. 1 Press SETUP.
2 CHANNEL SET UP will be selected. Press ENTER.
— TV SETUP —
B CHANNEL SET UP
Press SETUP to remove the menu.
4
CHANNEL SET UP V-CHIP SET UP
B LANGUAGE [ENGLISH] CAPTION [OFF]
3 Press ENTER to select ENGLISH, ESPAÑOL, or FRANÇAIS. The selected language will flash inside the [ ]. This will be the language of the TV/DVD setup menus.
— TV SETUP —
to select LANGUAGE.
1 Press SETUP.
2 Press ▲ or ▼
Menu Language, Resetting TV Channels 17
Menu Language
This affects the language of the TV/DVD’s setup menus and
● Before you begin, press SELECT to put the
TV/DVD in TV mode.
Helpful Hints
•If you select Spanish or French menus
and need English, press SETUP. Press ▲ or ▼ to select IDIOMA or LAN- GAGE. Press ENTER repeatedly to select ENGLISH. Then, press SETUP.
•The TV/DVD cannot change channels at the Cable Box or Satellite Receiver. Set the TV/DVD to channel 3, 4, or AUX. Change channels at the Cable Box/Satellite Receiver. See page eight.
•If the power fails, you may have to reset the TV channels.
•You cannot set up TV channels if the unit is in DVD mode.