Magnavox 20MDRF20 Changing the Access Code, Press or to select Change Code Then, press Enter

Press SETUP.

Setting V-Chip (cont’d) 23

Changing the Access Code

Although the default code 0000 is supplied with the TV/DVD, you can set your own access code.

●Before you begin, press SELECT to put the TV/DVD in TV mode.

1

2 Press ▲ or ▼ to select V-CHIP SET UP.

Then, press ENTER.

3 Press the Number buttons to enter the old access code. When doing this for the first time, use 0000.

ACCESS CODE

OPEN/CLOSE

3,5

PREV NEXT

2,4

1,6

– – – –

4 Press ▲ or ▼ to select CHANGE CODE.

Then, press ENTER.

– V-CHIP SET UP –

TV RATING

MPAA RATING

BCHANGE CODE

5 Press the Number buttons to enter your desired access code in the NEW CODE space. Then, enter the same code in the CONFIRM CODE space. The V-CHIP SET UP screen will reappear.

(Four Xs will appear on the screen instead of your code. This protects the code’s identity. Your code must have exactly four digits.)

NEW CODE

X X X X

CONFIRM CODE

6 Press SETUP to save your settings and remove the menus.

Helpful Hints

•If you enter the wrong code in the CONFIRM CODE space, repeat step 5. Enter the same new code exactly in the CONFIRM CODE space.

•If the power fails, the default code will be active again (0000). Change your access code again as necessary.