![](/images/new-backgrounds/1233129/23312927x1.webp)
PRESETTING THE CHANNELS
Once you have connected up this unit, you will need to tune in the channels in order to watch TV stations. There are two ways that you can do this:
-Automatic tuning The stations will be preset in the order that they appear when the automatic tuning is activated.
-Manual tuning In this mode the TV searches until a picture appears. If it is a station that you want to keep, you can choose which channel preset you want to store it on. You repeat this procedure for each station until you have stored all the desired stations.
AUTOMATIC TUNING |
|
| ||
1 Press MENU. |
| MENU | ||
Press | or | to select the | ON/OFF TIMER | |
CH TUNING |
| |||
CH TUNING mode, then press |
| |||
PICTURE |
ENTER. | AUDIO | |||
NICAM | AUTO | OFF | ||
| ||||
| AV COLOUR AUTO | |||
| LANGUAGE | |||
| PRESS: ▲/ ▼/ ENTER / MENU |
2 Press or
to select the AUTO mode, then press ENTER.
3 All available channels in your area are automatically scanned and stored in the memory of the unit. When the set has finished scanning, the screen shown in step 2 appears.
CH TUNING
MANUAL
AUTO
CH ALLOCATION
PRESS: ▲/ ▼/ ENTER / MENU
CH position
CH 10
PAL
Searching direction
Tuning segment bar
NOTES:
•If you want to skip any channels, refer to page 16.
•When the unit is in the AV mode, you can’t preset the channels.
4 Press MENU twice.
The unit will return to normal TV screen.
5 The automatic tuning will not necessarily store the channels in the correct order. If you want to change the order of the stored channels, please see page 14.
12