CONVENIENT FUNCTIONS
The following functions are available from the remote control handset only.
TV/AV Selection
For receiving the desired signal:
Press AV to select the TV or AV mode.
TV position - to view a normal TV programme.
QUICK VIEW
AV position - to receive through the direct Video in- put. AV1 (from 21 pin SCART socket on the rear), AV2 (from Audio/Video in sockets on the rear) or AV3 (from Audio/ Video in sockets on the left side) indicator appears on the screen in AV mode.
16
This button allows you to go back to the previous channel by pressing QUICK VIEW. Press this button again to return to the channel you were watching.
DISPLAY
When you press this button once, the channel number will appear. Press this button again, then the display will disappear.
MUTE
When MUTE is pressed, the TV sound will be turned off completely. To disable this function, press the button again or VOL + or
SLEEP
To set the unit to turn off, press SLEEP on the remote control. The clock will count down 10 minutes each time the button is pressed in the order of 120, 110, 100,...20, 10, 0. After the sleep time is programmed, the display will disap- pear and will reappear momentarily every 10 minutes. To confirm the sleep time setting, press SLEEP once and the remaining time will be momentarily displayed.
To cancel the sleep time, press SLEEP repeatedly until the display turns to 0.
SKIP FUNCTION
After all channels available in your area have been set in memory, you can skip unwanted channels as follows.
1 Press CH M or ? to select the channel which you want to skip.
2 Press CANCEL.
When a channel is skipped, the channel number will blink.
3 Skip all unwanted channels the same way following steps
NOTE:
To cancel the SKIP function, press DIRECT CHANNEL SELECTION (numeric buttons) to select the channel which you want to cancel, then press CANCEL again.
FREEZE
This function allows you to make a freeze frame of your favorite picture onto the
To cancel freeze, press FREEZE again.