Orion 14LD manual Playback Procedure

NOTES:

•If a non-compatible disc is loaded, “Incor- rect Disc”, “Region Code Error” or “Paren- tal Error” will appear on the TV screen ac- cording to the type of loaded disc. If these appear, check your disc again (see pages 24 and 40).

•Some discs may take a minute or so to start playback.

•If you insert a disc with the label facing away from you (ie. the wrong way around), “Reading” will appear on the display for about 5 seconds and then “No Disc” or “Incorrect Disc” will be displayed.

•Some playback operations of DVDs may be intentionally fixed by software produc- ers. Since this unit plays DVDs according to the disc contents the software produc- ers designed, some playback features may not be available. Also refer to the in- structions supplied with the DVDs.

PLAYBACK PROCEDURE

1 Press TV/DVD to select DVD mode.

2 Place the disc in the disc slot with the label side facing forward. (If the disc has a label.) Hold the disc

without touching either of its surfaces, align it with

the guides, and place it in position.

3 On the TV-screen, “No Disc”	No Disc
changes to “Reading” and
then playback commences.
• A menu screen will
appear on the TV screen,
if the disc has a menu
feature.	Reading

4 Press / or / to make a selection.

5 Press ENTER.

• Title is selected and play commences.

6 Press STOP to end playback.

•The unit memorizes the stopped point, depending on the

disc. “” appears on the screen. Press PLAY to resume playback (from the scene point).

•If you press STOP again or unload the disc (“ ” appears on the screen.), the unit will clear the stopped point.

7 To stop the playback, press STOP. Then press (EJECT).

Remove the disc and press Power . The unit turns off.

27