Orion 14LD manual Presetting the Channels, Manual Tuning

PRESETTING THE CHANNELS

MANUAL TUNING

How to tune a station to channel 10 position.

1 Press MENU.

Press or to select the CH TUNING mode, then press

ENTER.

2 Press or to select the MANUAL mode, then press

ENTER.

3 Press or to select PAL or SECAM-L. Then press ENTER.

4 Press or until the picture appears on screen. If this is not your desired channel, press

or until your desired channel appears.

If you need to make the picture

clearer, use or (FINE TUNING).

Then press ENTER.

5 Pressor to select channel position No.10, then press

ENTER.