Orion 10DT Connection to Other Equipment, Using an Audio Amplifier, Rear of unit

CONNECTION TO OTHER EQUIPMENT

The exact arrangement you use to interconnect various video and audio components to the unit is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs.

Using an Audio Amplifier

Rear of unit

OUTPUT • SORTIE

DIGITAL		RF IN	ON OFF	Amplifier
AUDIO	COAXIAL		MAIN POWER
ANALOGUE	L(G)
AUDIO		SCART
				To Audio (L) Input	To Audio (R) Input
	R(D)	PRISE PERITEL

Audio (L) Output	AUDIO cord (not supplied)
Audio (R) Output

Using an AV Amplifier with built-in digital surround

If you are using an Amplifier with a built-in digital surround sound decoder (such as Dolby Digital / DTS / MPEG / etc.), you can connect it as shown below.

Rear of unit

Coaxial Digital Audio Output

OUTPUT • SORTIE

DIGITAL		RF IN	ON OFF
AUDIO	COAXIAL		MAIN POWER
ANALOGUE	L(G)
AUDIO		SCART
	R(D)	PRISE PERITEL

Coaxial digital cable (not supplied)

To Coaxial Digital Audio Input

	Front
This unit Subwoofer	Speaker
	(Right)

Front

Speaker

(Left)

Center Speaker

Surround	Surround
Speaker (Left)	Speaker (Right)

AV Amplifier with built-in digital surround decoder as listed above

*Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved.

*DTS and DTS Digital Out are trademarks of Digital Theatre Systems, Inc.

NOTES:

•When you make the connections above, make sure that the power of all units is switched off at the mains.

•Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.

•When playing DTS encoded material, the sound will only be available through the Digital Audio Output Socket.

7