NEC LED-VD1 user manual Important Information

Page 4

Important Information

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.

CAUTION: Please use the power cord provided with this display in accordance with the table below. If a power cord is not supplied with this equipment, please contact your supplier. For all other cases, please use a power cord that matches the AC voltage of the power outlet and has been approved by and complies with the safety standard of your particular country.

Plug type

North America

European

U.K.

Japanese

Continental

 

 

 

 

Plug shape

Region

U.S.A./Canada

EU (except U.K.)

U.K.

Japan

 

 

 

 

 

Voltage

120*

230

230

100

*When operating the video distributor LED-VD1 (D000LD) with its AC 125-240V power supply, use a power supply cord that matches the power supply voltage of the AC power outlet being used.

NOTE: This product can only be serviced in the country where it was purchased.

English-2

Image 4
Contents LED-VD1 Index Declaration of conformity For USAFor Canada FCC InformationImportant Information Safety Precautions, Maintenance & Recommended Use Contents Front Panel Parts Name and FunctionsRear panel Connecting an External Device Connecting the PowerConnect the power plug to a commercial power source outlet ConnectionsBefore Connecting Connection MethodsHow to Install Installing DriversCompatible Operating Systems English-9 Troubleshooting Check the following itemsSpecifications AppendixPin Assignment RS-485 Communications ProtocolDimensional Drawing Disposing of your old NEC product Manufacturer’s Recycling and Energy InformationWeee Mark European Directive 2002/96/EC