Safety Precautions, Maintenance & Recommended Use
FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING
WHEN SETTING UP AND USING
THE VIDEO DISTRIBUTOR:
•DO NOT OPEN THE VIDEO DISTRIBUTOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks.
Refer all servicing to qualified service personnel.
•Do not spill any liquids into the cabinet or use your video distributor near water.
•Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltage points, which can be harmful or fatal or may cause electric shock, fire or equipment failure.
•Do not place any heavy objects on the power cord. Damage to the cord may cause shock or fire.
•Do not place this product on a sloping or unstable cart, stand or table, as the video distributor may fall, causing serious damage to the video distributor.
•The power supply cord you use must have been approved by and comply with the safety standards of your country.
(Type
•In UK, use a
•Do not place any objects onto the video distributor and do not use the video distributor outdoors.
•Do not bend, crimp or otherwise damage the power cord.
•If video distributor is broken, handle with care.
•Do not cover vent on video distributor.
•Do not use video distributor in high temperature, humid, dusty, or oily areas.
•Allow adequate ventilation around the video distributor, so that heat can properly dissipate. Do not block ventilated openings or place the video distributor near a radiator or other heat sources.
Do not put anything on top of the video distributor.
•The power cable connector is the primary means of detaching the system from the power supply. The video distributor should be installed close to a power outlet, which is easily accessible.
•Do not move or mount this product by hanging a rope or wire to the backside handle.
Do not mount or secure this product by using the backside handle. It may fall and cause personal injury.
•Handle with care when transporting. Save packaging for transporting.
•Please clean the holes of back cabinet to reject dirt and dust at least once a year because of set reliability.
•It’s recommended to wipe holes a minimum of once a month.
Immediately unplug your video distributor from the wall outlet and refer servicing to qualified service personnel under the following conditions:
•If the video distributor has an unusual odor.
•When the power supply cord or plug is damaged.
•If liquid has been spilled, or objects have fallen into the video distributor.
•If the video distributor has been exposed to rain or water.
•If the video distributor has been dropped or the cabinet damaged.
•If the video distributor does not operate normally by following operating instructions.
Cleaning the Cabinet
•Unplug the power supply
•Gently wipe the cabinet with a soft cloth
•To clean the cabinet, dampen the cloth with a neutral detergent and water, wipe the cabinet and follow with a dry cloth.
NOTE: DO NOT clean with benzene thinner, alkaline detergent, alcoholic system detergent, glass cleaner, wax, polish cleaner, soap powder, or insecticide. Rubber or vinyl should not be in contact with the cabinet for an extended period of time. These types of fluids and materials can cause the paint to deteriorate, crack or peel.