Jensen Tools DV1628 owner manual Troubleshooting

Troubleshooting:

PROBLEM	CAUSE	CORRECTIVE
		ACTION
Does not	No power to	Check power
		connection with
operate,	Yellow wire,
		Multi-meter. Check
display does	No power to
		fuse for continuity
not light.	Red
		with Multi-meter.
	Inline fuse	Replace fuse.
	blown
No power to	Inline fuse	Check and/or
unit	blown	replace fuse.
No Audio to	Speaker	Check speaker
	harness not	wires, connect
speakers
	connected	harness.
	Power wire	Make sure wire is
Blows fuses	shorting to
		not pinched.
	ground
	Speaker	Make sure wire is
	wires shorting
		not pinched.
	to ground
	Incorrect	Replace with
	fuse/ rating
		proper fuse.
	too small
	Mounting	Check proper
		mounting angle
	angle is too
CD/DVD skips		and/or mounting
	great or not
		strap for secure
	secure.
		mounting.
	Dirty laser.	Use CD/DVD
		cleaning kit.

3

ERROR

DISPLAY

CDP and CDC
ERR1 appears	Mechanism	Press Reset button.
on display	Error
ERR6 appears	Sled Error	Press Reset button.
on display
CDP ONLY
ERR2 appears	Servo Error	Press Reset button.
on display
		Check disc - disc
ERR7 appears	TOC reading	may be dirty or
		upside down. If not
on display	error
		press the reset
		button.
CDC ONLY
		Check disc - disc
ERR2 appears	TOC reading	may be dirty or
		upside down. If not
on display	error
		press the reset
		button.
ERR3 appears	Temperature	Press Reset button.
on display	error
ERR7 appears	Disc and	Press Reset button.
on display	Servo error

3