DV1628
Owner's Manual
Thank you!
Thank you for choosing a JENSEN product. We ve tried to make the instructions in this owner s manual clear and easy to follow. If you take a few minutes to look through it, you ll learn how to use all of the features of your new JENSEN AM/FM/CD/DVD player for maximum enjoyment.
Installation | 1 |
Troubleshooting | 3 |
Operation | 4 |
Specifications | 16 |
Warranty | 17 |
1
Installation:
Getting Started.
It is a good idea to read all of the instructions before you begin the installation.
Tools and supplies needed:
•Flat and Phillips screwdrivers
•Wire cutters and strippers
•Tools to remove existing radio
•Electrical tape
•Crimping tool
•Volt meter/ Test light
•Crimp connections
•Speaker Requirements: Only connect speakers rated in the load impedance range of 4 Ohms. Speakers with a load impedance less than 4 Ohms could damage the unit
1.Prepare:
•Disconnect battery. Before you begin always disconnect the battery s negative terminal
2.Mounting angle:
•Do not exceed a 30¡ mounting angle. Improper operation of the unit could occur if the mounting angle is exceeded.
3 0
3. Removal of factory radio or DV1628:
1