Jensen Tools DV1628 owner manual

Page 6

Front Panel removal:

a.Press the open button #3.

b.Press the middle release button and pull the panel straight out.

Radio Removal

a.Grab the grooves of the front frame with fingers and pull.

b.Insert the supplied levers inside the grooves on the right and left hand side of the radio. Pull the levers out as shown.

6

2. MP3 Compatible:

This unit supports the following MP3 CD formats:

Joliet

Romeo

ISO9660

3.Smart Mode function:

The Smart Mode feature allows the user to listen to two different audio sources at the same time. One source can be selected through the speaker system while the DVD can be listened to through an external audio source. Ex. IR transmitter for wireless headphones.

Smart mode is activated only in DVD mode.

Press Source button #4 to enter DVD mode.

Press Smart button #29 to activate Smart Mode

Press Smart button #29 again to deactivate Smart Mode.

When Smart Mode is active, Smart Mode will be displayed in the top right corner of the Radio display.

Pressing the Source button #4 while in Smart mode will change the Audio source being played on the speakers. The Smart Mode audio to the external audio source will remain DVD.

1

2

3

6

Image 6
Contents Thank you Getting StartedWire Connections Troubleshooting Enter / Mute Power ButtonSource OpenDisplay ResetRemote IR EjectPage General Setup TV Display Initial SetupGeneral Setup TV TypePIC Mode Angle MarkClosed Captioning OSD Language SetupSpeaker Setup Down Mix9MS 3MS OFF Speaker selectionAudio Setup DRC Dynamic Range Control Dual Mono Lpcm OutputLanguage Setup screens Parental Controls Smart NAVDefault Table General Specifications Warranty DAY / 12 Month Limited Warranty 88-V1621-13