Emerson EWC09D5 B, EWC09D5 owner manual Troubleshooting Guide, Problem Corrective Action

Page 29

TROUBLESHOOTING GUIDE

If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the player, consulting the following checklist.

Problem

Corrective Action

No power.

Make sure the power plug is connected to an AC outlet.

 

Make sure the power is turned on.

The unit does not respond to

Check if the power plug is connected to an AC outlet.

the remote control.

Check the batteries in the remote control.

 

Aim the remote control directly at the remote sensor. If necessary,

 

remove all the obstacles between the sensor and the remote.

 

You have to be within 23 feet of the unit.

 

Check if the correct mode is selected. If not switch the mode by hit-

 

ting [SELECT], whichever you need.

TV Mode

Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save your time and money.

Problem

Corrective Action

 

No Picture or Sound

Try a new channel, if OK, then possible station trouble.

 

 

Make sure the power is turned on.

 

 

Hit [SELECT] on the remote control to select TV mode. Then try

 

other TV feature.

 

 

Is antenna connected to terminal on the back of the set?

 

 

If outside antenna is being used, check for broken wire.

 

 

Check for broken pin of the antenna cable.

 

Bars On Screen

If outside antenna is being used, check for broken wire.

 

 

Check for local interference.

 

Picture Distorted or Blurred

Try a new channel, if OK, then possible station trouble.

 

 

If outside antenna is being used, check for broken wire.

 

Picture Rolls Vertically

Try a new channel, if OK, then possible station trouble.

 

Lines or Streaks in Picture

If outside antenna is being used, check for broken wire.

 

 

Check for local interference.

 

No Color

Try a new channel, if OK, then possible station trouble.

 

 

Is antenna connected to jack on the back of the set?

 

 

If outside antenna is being used, check for broken wire.

 

 

Adjust “COLOR” control.

 

Poor Reception on Some Channels

Try a new channel, if OK, then possible station trouble.

 

Ghosts in Picture

Is antenna connected to jack on the back of the set?

 

 

If outside antenna is being used, check for broken wire.

 

 

Check for local interference.

 

Weak Picture

Try a new channel, if OK, then possible station trouble.

 

 

Is antenna connected to jack on the back of the set?

 

 

If outside antenna is being used, check for broken wire.

 

 

Adjust “CONTRAST” & “BRIGHT” control.

 

Sound OK, Picture Poor

Try a new channel, if OK, then possible station trouble.

 

 

Is antenna connected to jack on the back of the set?

 

 

If outside antenna is being used, check for broken wire.

 

 

Check for local interference.

 

 

Adjust “CONTRAST” & “BRIGHT” control.

 

Picture OK, Sound Poor

Try a new channel, if OK, then possible station trouble.

 

 

Check for local interference.

 

Different color marks on screen.

Magnetism from nearby appliances and geomagnetism might affect the

 

color of the TV picture. Move the unit away from the appliances, the

 

 

unit can repair itself automatically. If you want to repair immediately,

 

 

unplug the unit power cord, then plug it in again 30 minutes or so later.

 

 

 

 

– 29 –

EN

Image 29
Contents EWC09D5 EWC09D5 B Important Safeguards S2 8 9 8 a Laser Safety PrecautionsImportant Copyright Information RADIO-TV InterferenceSymbols Used in this Manual Supplied AccessoriesLocationwarning Avoid the Hazards Electrical Shock and FireTable of Contents TV Mode FeaturesPlays back from the beginning of the next chapter Operating Controls and FunctionsSleep Button page 15 Sets the sleep timer REV h Button Installing the BatteriesIndoor Antenna Preparation for USEANTENNA/CABLE Connection Then hit Select until AUX appears on the screen Connecting to External Input JacksMobile Connection Digital Input Jacks for DVD Connecting to a Stereo Amplifier Equipped withConnecting to a Dolby Digital Decoder for DVD SET UP for First Time TV Operation and SettingsWatching a TV Program To Watch Cable or Satellite ChannelTo Cancel the Sleep Timer Sleep TimerPicture Control DegaussingResetting Channels Channel ResettingADDING/DELETING Channels EnterMenu Language Unplayable Discs About the DiscsPlaying a Disc Basic Playback General FeaturesDisc Menu Title MenuPause ResumeFast Forward Fast Reverse Slow Forward Slow ReverseSearch Function Marker Setup ScreenTrack Search Time Search Title / Chapter SearchRandom Playback Special Playback FunctionRepeat Program Stereo Sound Mode Changing the SettingsSubtitle Language Audio LanguageVirtual Surround Black Level SettingCamera Angle For DVD-Vs ON-SCREEN InformationCustom Menu Changing the DVD Setup ItemsLanguage Setting Audio Settings Display SettingWhen playing disc with copy QuickParental Control InitializeProblem Corrective Action Troubleshooting GuideDVD Cabinet Cleaning MaintenanceDisc Handling ServicingGeneral Specifications SpecificationsElectrical Specifications Other SpecificationsPanel Frontal DE LA Unidad Controles DE Operación Y FuncionesMando a Distancia Vista PosteriorUtilización Preparación Para LAPara Insertar LAS Pilas Conexiones DEConexión a Tomas DE Entrada Externa LA Antena InteriorConexión Movil Antena Combinada DE VHF/UHFConexción a UN Decodificador Dolby Conexión a UNNotas Consulte la figura 7 de la páginaMirando UN Programa DE TV Funciones Y Ajustes DE TVPara VER Canales DE Cable O Satelite Para VER LA Entrada ExternaReanudación Reproducción BásicaMenú DE Disco Memo Tel Duration