Grundig 42 VLS 9140 S manual Connecting the antenna and power cord, Connection and preparation

Connection and preparation------------------------------------------------

Connecting the antenna and power cord

3

1

2

1To receive digital satellite channels (DVB-S), connect the satellite antenna cable to the

antenna­ socket »SATELLITE« on the televi- sion set.

And/or:

2a To receive terrestrial digital broadcasters (DVB-T) connect the cable for the rooftop or indoor antenna (passive or active indoor antenna with its own power supply) to the an- tenna socket »ANT IN« on the television set;

or

2b To receive digital cable channels (DVB-C) connect the cable for the rooftop antenna to the antenna socket »ANT IN« on the ­television set;

or

2c To receive analogue TV channels, connect the cable for the rooftop antenna to the an- tenna socket »ANT IN« on the television set

Note:

7When connecting an indoor antenna you may have to try it out at different positions until you get the best reception.

3Plug the power cord into a wall socket.

Note:

7Do not plug in the power cord of the device until you have connected the external equip- ment and the antenna.

7Only use the power cord supplied to connect­

the television set to a suitable earthed safety socket.

7Do not use an adapter plug or extension lead which does not meet the applicable safety standards. Do not tamper with the power cord.

­8 ENGLISH