FUNAI MWC13D5 A owner manual Connecting to External Input Jacks

CONNECTING TO EXTERNAL INPUT JACKS

When you watch a program recorded on another source (VCR or video camera), use the audio/video input jacks on the front of the unit.

Connect the audio/video output

jacks of another source to theAUX AUDIO L/R and VIDEO jacks of

this unit. Then hit [SELECT] until "AUX" appears on the screen. NOTE:

•When you connect a monaural VCR (another source) to this unit, connect the Audio output jack of the monaural VCR (another source) to the AUDIO L jack of this unit. The audio will output in both L and R channel equally.

	[Front of the unit]
			VIDEO L –AUDIO– R STANDBY-ON
[Another source]	To the
	audio out-
	put jacks
	To the video	VIDEO	L –AUDIO– R
	output jack
etc.
Audio/Video			[Fig. 5]
cables
(not supplied)

CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL

INPUT JACKS, MD DECK OR DAT DECK (for DVD only)

Use an audio coaxial digital cable (commercially available) for the audio connections.

Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.	To Coaxial digital
	Audio input jack	ANT.
		COAXIAL

Audio coaxial digital cable

(commercially available)To COAXIAL jack (Only DVD AUDIO OUT)

[Fig. 6]

NOTES:

•The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck.

•Be sure to turn off the power to all components in the system before connecting another component.

•Refer to the Owner's Manuals for the components to be connected to the unit.

•Set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a unit using incorrect settings may generate noise distortion and may also damage the speakers. (See page 28 to set DOLBY DIGITAL to OFF.)

– 11 – EN