LOCATION |
| SYMBOLS USED IN THIS MANUAL |
|
|
|
For safe operation and satisfactory performance of your unit, keep the following in mind when selecting a place for its installation:
•Shield it from direct sunlight and keep it away from sources of intense heat.
•Avoid dusty or humid places.
•Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.
•Install unit in a horizontal position.
•Avoid locations subject to strong vibration.
•Do not place the unit near strong magnetic fields.
•Avoid moving unit to locations where temperature differences are extreme.
•Be sure to remove a disc and unplug the AC power cord from the out put before carrying the unit.
AVOID THE HAZARDS OF
ELECTRICAL SHOCK AND FIRE
•Do not handle the power cord with wet hands.
•Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug.
•If by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing.
•Do not put your fingers or objects into the unit disc loading tray.
•Do not place anything directly on top of the unit.
WARNING
Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place or after heating a cold room or under conditions of high humidity. If a DVD is played in a unit which has moisture, it may damage the DVD and unit. Therefore when the condensation occurs inside the unit, turn POWER on and allow at least 2 hours for the unit to dry out.
The following symbols below appear in some head- ings and notes in this manual, with the following meanings
TV
:Description refers to TV operation (in the TV mode).
DVD-V
:Description refers to playback of
CD
:Description refers to playback of Audio CDs (in the DVD mode).
QUICK
:Description refers to the items to be set by the QUICK mode (in the DVD mode).
– 5 – | EN |