FUNAI MGD134 owner manual Mpaa Rating SET UP, Change Access Code

- TV SETUP -

CHANNEL SET UP B V-CHIP SET UP

LANGUAGE [ENGLISH] CAPTION [OFF]

ACCESS CODE

_ _ _ _

– V-CHIP SET UP –

TV RATING MPAA RATING

B CHANGE CODE

NEW CODE

_ _ _ _

CONFIRM CODE

_ _ _ _

MPAA RATING SET UP

Make sure ...

•TV/DVD power must be turned on.

1 Select “V-CHIP SET UP”

Press SETUP on the remote control.	- TV SETUP -
Press Arrow (K/L) to point to “V-	CHANNEL SET UP
	LANGUAGE [ENGLISH]
	B V-CHIP SET UP
CHIP SET UP”.	CAPTION [OFF]
Then press ENTER.
2 Enter 4-digit access code	ACCESS CODE
Press the number buttons. The
default code is 0000.		_ _ _ _

CHANGE ACCESS CODE

To change access code, follow the steps.

1Select “V-CHIP SET UP”

Press SETUP on the remote con-

trol.

Press Arrow (K/L) to point to “V-

CHIP SET UP”. Then press ENTER.

2Enter 4-digit access code

Press the number buttons. The default code is 0000.

3Select “MPAA RATING”

Press Arrow (K/L) to point to “MPAA RATING”.

Then press ENTER.

– V-CHIP SET UP –

TV RATING

BMPAA RATING CHANGE CODE

3Select “CHANGE CODE”

Press Arrow (K/L) to point to “CHANGE CODE".

Then press ENTER.

4Select your desired item

Press Arrow (K/L) to point to your

desired item.	G	[VIEW]
	PG–13	[VIEW]
	PG	[VIEW]
Then press ENTER to select	B R	[BLOCK]
	X	[BLOCK]
	NC–17	[BLOCK]
[BLOCK] or [VIEW].

Selection	Rating Category Explanations
G	General Audience
PG	Parental Guidance suggested.
PG-13	Unsuitable for children under 13
R	Restricted; under 17 requires accompa-
	nying parent or adult guardian
NC-17	No one under 17 admitted
X	Mature audience only

•When you select the rating category and turn it [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically.

•When you turn “G” to [VIEW], all ratings will turn to [VIEW] automatically.

5Exit the V-Chip setting mode

Press SETUP on the remote control to return to origi- nal mode.

4Enter 4-digit access code

Press the number buttons to enter your desired access code in the NEW CODE space. Then enter the same code in the CONFIRM CODE space. V-CHIP SET UP screen appear on the screen.

•If you enter wrong code, repeat step 4, making sure you enter the same new code exactly in the confirm code space.

5Exit the V-Chip setting mode

Press SETUP on the remote control to return to orig- inal mode.

NOTE:

•If you unplug the power cord or power failure occurs, the changed access code will be lost and will return to default (0000). Change your access code again as necessary.

– 18 – EN

0C28