Bosch Appliances E2600 manual Turn on the DC power, Power cable

Page 13

E2600 DSA E-Series iSCSI Disk ArraysTurn on the DC power en 13

7

Turn on the DC power

 

 

 

Notice!

i

DC power is an option that is available for use with your E2600 controller-drive tray and drive

trays. If you choose to have –48 VDC power available, you need a qualified service person to

 

install the equipment that provides special DC power connectors to each power-fan canister

 

in your storage array.

 

 

 

 

 

Warning!

!

Risk of bodily injury

A qualified service person is required to make the DC power connection according to NEC

 

and CEC guidelines.

 

 

Warning!

Risk of electrical shock

!This unit has more than one power source. To remove all power from the unit, all DC MAINS must be disconnected by removing all power connectors (item 4 below) from the power sup- plies.

 

+

1

2

 

-

3

4

Figure 7.1: Power cable

1

Supply (Negative), Brown Wire, –

3

Ground, Green/Yellow Wire

 

48 VDC

 

 

 

 

 

 

2

Return (Positive), Blue Wire

4

DC Power Connector

 

 

 

 

Warning!

Risk of bodily injury

!Each tray has more than one power cord. To remove all electrical current from the devices, make sure that all of the power cords are disconnected from the power source and that the two-pole 20-amp circuit breaker for the storage array has been disconnected.

Bosch Sicherheitssysteme GmbH

Quick Install Guide

07/2012 V1

Image 13
Contents E2600 DSA E-Series iSCSI Disk Arrays Page Table of contents Learn about management methods Before you beginE2600 DSA E-Series iSCSI Disk Arrays Before you begin en Controller-Drive Tray 12 Drives Front View Device viewMounting Rails Install the mounting rails4Install the controller-drive tray Controller-Drive Tray 12 Drives 5Secure the controller-drive trayHost-to-Controller Cabling Connect the cablesE2600 DSA E-Series iSCSI Disk Arrays Connect the cables en En Connect the cables E2600 DSA E-Series iSCSI Disk Arrays Power cable Turn on the DC powerEn Turn on the DC power E2600 DSA E-Series iSCSI Disk Arrays Turn on the AC power 9Install and configure the storage array Page Bosch Sicherheitssysteme GmbH