Westinghouse UW37SC1W manual Screen Size, VGA Settings, VGA source, AV/YPbPr/HDMI/TV

SETUP MENUS

2Press thekeys on the remote control to adjust the sharpness level.

3Press to save and exit the screen.

Screen Size

Press / to selet the display aspect ratio till the picture is fit onto the screen. The options are different according to different input source.

VGA source

Two settings are available:

•Wide: Use to watch wide size content.

•Dot by Dot: means NOT any scaling to original input pixels size.

AV/YPbPr/HDMI/TV

Four settings are available:

•Normal: suitable to watch common TV program.

•Wide: do horizontal scaling on the wide panel.

•Cinema: for the 2.39:1 (perhaps marked as 2.40:1 on the disc) film.

•Zoom: suitable to view the analog TV which has wide(16:9) content on the 16:9 panel.

Adjusting Screen Size

1 Use thekeys to select Screen Size and press .

2 Press thekeys on the remote control to select the desired option.

3Press to save and exit the screen.

VGA Settings

VGA Settings Menu is available only in VGA DB15 or DVI mode. When DVI signal input, only Horizontal Position and Vertical Position can be adjusted.

Press / to highlight one of the following options, then press SELECT to select it.

English

37