Westinghouse UW37SC1W manual Troubleshooting, Problem Corrective Action

		TROUBLESHOOTING
TROUBLESHOOTING
	Problem	Corrective Action
	No power	• Make sure the power indicator is illuminated
		blue.
		• Make sure the power cord is securely connected
		to the AC-in jack and is plugged into a functional
		AC outlet. You may want to plug in another
		electrical device to the power outlet to verify that
		it is supplying the proper voltage.
	Power is suddenly turned	Make sure the sleep timer is turned off.
	off.
	Remote control does not	• Press only one button at a time.
	work.	• Make sure the batteries are properly inserted.
		• The batteries may already be drained out.
		Replace batteries with new ones.
	Remote control code	• Purchase a separate learning remote control.
	cannot be detected by a	• Go to www.wde.com for a list of remote codes.
	universal remote.
	No picture	• Make sure the video input cable is properly
		connected to the correct terminal, and that the
		correct input mode is enabled. To illustrate, when
		a VGA cable is connected to display a computer
		screen, the VGA input mode must be enabled.
		• Verify that the antenna is properly connected
		and that the preferred channel is enabled in the
		channel list. Press and select Channels/Channel
		List.
		• Adjust the display settings.
	No picture or the No Signal	• Make sure the VGA cable is properly connected
	message appears when a	to the LED TV’s VGA port.
	VGA cable is connected.	• Decrease the video resolution setting on the
		computer and try again.
		• Adjust the display settings.
		59

English