K. Playing DVDs
DVD Playback
1. Press “DVD/TV/AUX” until the word “DVD” appears on the top right of the screen.;
2. Insert the disk in the right side of the unit with label 
facing to you. Then the disk will be pulled into the unit 
and play will begin automatically.
DVD discs will usually show a menu to choose from. Use the navigation buttons 
on the remote control.
Highlight the desired menu item and press the ENTER button to activate it. This starts the playback of the selected title.
To stop playback press the STOP button once. The screen shows “ 
”. The player will recall
the location where playback was stopped.
Press the PLAY button to resume playback there. But if you press the STOP button again the unit will stop and not recall the last position of playback.
The “resume play” is not supported by all discs.
If this symbol appears on the screen during operation, the function requested is not supported by the media type inserted.
Volume: The Volume +/- is on the top of the unit. Press to adjust the volume.
Picture: the button is on the top of the unit. Press it to choose the item about picture you want to change. Then press Volume +/- to adjust it.
16