Chapter 5: Magnum Router Manager Installation
___________________________________________________________________
5-1
About the Manager Software
The Magnum Router GUI Manager is a configuration and management software for the
Magnum Router that runs on Windows. The Manager functions much the same as other
Windows programs.
The following will be required to install the software:
• The Magnum Router GUI Manager installation disk.
• PC with a hard drive that has at least 2 Mb of available space and a CD-ROM drive
• Windows 95, 98, 2000, ME, XP or NT workstation 4.0 PC operating system
Installing Manager Software
The Magnum Router GUI Manager is installed much the same as any Windows software.
Follow these easy steps:
Exit all open Windows programs.
Insert the Magnum Router GUI Manager cd in your computers cd drive.
The Setup program should automatically start. If it does not, click on My Computer and select
drive x: (where x is the CD-ROM drive) and double-click on the Setup program.
Once the Setup program is started, the pre-installation screen will be displayed as shown below:
Figure 1 - Setup Pre-Installation Screen
If this is an upgrade from a previously installed version of the Magnum Router Manager,
follow the “Upgrading” steps below.
In some cases, the Setup program needs to do a pre-installation of certain support
programs, and then requires a reboot for these programs to take effect. If this occurs, after the
reboot, just restart the Setup program as outlined below.