Marathon MAGNUM ROUTER manual Magnum Router GUI Manager Adding an Advanced Routing Entry

Chapter 7: Magnum Router GUI Manager

___________________________________________________________________

Adding an Advanced Routing Entry

To add an entry in the WAN IP Route Map screen, perform the following steps:

1.Click New Entry or press ALT-N

2.Enter data in the IP Address, Subnet Mask, and Gateway Address fields

3.Click Save Edit or press ALT-V to save the entry

4.Click Exit Edit or press ALT-X to return to the WAN IP Route Map screen.

Changing an Advanced Routing Entry

It is possible to change an entry after it has been entered into the table. Follow these steps to change an entry:

1. Double-Click on the entry that needs modification in the table

This will cause all of the entry data to be loaded in the fields above the table.

2.Make any modifications required

3.Click on Save Edit or press ALT-V

4.Click on Exit Edit or press ALT-X

If this entry was selected by mistake and is not the one that needed modification, just click on the Exit Edit or press ALT-X.

Deleting an Advanced Routing Entry

In some cases, an entry may need to be deleted. To do this, follow these steps:

1.Select an entry in the table.

2.Either click the Delete Entry button or press ALT-D.

3.A verification question is asked to make sure that this is the entry to delete, if it is, select Yes. Selecting No will return to the Advanced Routing screen.

Repeat for each entry that is to be deleted.

Once the additional routes have been added, click on Save or press ALT-V to save any changes, then click on Exit, or press ALT-X to return to the WAN-IP Route Map screen.

7-15