Chapter 10: Magnum Router Troubleshooting
___________________________________________________________________
Chapter 10: Magnum Router Troubleshooting
LED Display Indicators
The LED display indicators are found on the front of the module and are viewable from the front side of the Marathon base unit chassis. The LED messages are displayed in the table below:
LED | Color | Meaning | |
|
|
| |
OK | Red | Unit is successfully installed in the Marathon base unit chassis | |
|
|
| |
OK | Off | Magnum Router module is NOT installed properly (power down and check to | |
ensure the module is "seated" properly in the Marathon module stack) | |||
|
| ||
|
|
| |
LK | Green | Magnum 10/100 | |
local LAN switch or hub port | |||
|
| ||
|
| Magnum 10/100 | |
LK | Red | local LAN switch or hub port (double check that you have used the patch | |
cord / LAN cable provided p/n M5000C/CAT5E and that you have a known | |||
|
| ||
|
| good switch/hub port | |
|
|
| |
W3 | Green | WAN port is up and operational | |
W2 |
|
| |
W1 |
|
| |
W3 | Red | WAN port is NOT up or operational | |
W2 |
|
| |
W1 |
|
| |
M1 | Green | M1 Magnum to A1 Marathon link is successfully programmed and | |
operational | |||
|
| ||
M1 | Red | M1 Magnum to A1 Marathon link is not up or operational. | |
|
|
|
