Chapter 6: Logging Onto a Magnum Router
___________________________________________________________________
Magnum Router Manager Terminal Commands
As seen in the above screen, the terminal has 3 basic commands:
This sends a “break” sequence to the attached device. As an example, it is required to send 3 “break” sequences to terminate a Marathon Matrix connection. Each time this button is clicked, the terminal program will show “Break Sent” in the display when it has completed the task.
This is used for capturing incoming data to a file. Clicking on the “Start Capture” button will display the file save screen.
Enter the file name and click on Save. Once this has been done, the Start Capture button changes to Stop Capture.
Once the desired data has been captured, click on the Stop Capture.
Select this to close the terminal program and return to the main login screen.
