
Chapter 7: Magnum Router GUI Manager
___________________________________________________________________
Changing a Remote Name Entry
It is possible to change an entry after it has been entered into the table. Follow these steps to change an entry:
1.
This will cause all of the entry data to be loaded in the fields above the table.
2.Make any modifications required
3.Click on Save Edit or press
4.Click on Exit Edit or press
If this entry was selected by mistake and is not the one that needed modification, just click on the “Exit Edit” or press
Deleting a Remote Name Entry
In some cases, an entry may need to be deleted. To do this, follow these steps:
1.Select an entry in the table.
2.Either click the Delete Entry button or press
3.A verification question is asked to make sure that this is the entry to delete, if it is, select yes.
Repeat for each entry that if to be deleted.
Set Unit Name
Selecting this option will display the SET MANGUM NAME screen. This allows for a Magnum Router to be given a unique name for documentation purposes.
Port Configuration
Selecting the PORT CONFIGURATION is the same as clicking on the PORT CONFIG button of the main screen. See Toolbar.
Ethernet Configuration
Selecting the ETHERNET CONFIGURATION is the same as clicking on the ETHENET CONFIG button of the main screen. See Toolbar.
WAN Configuration
Selecting the WAN CONFIGURATION is the same as clicking on the WAN CONFIG button of the main screen. See Toolbar.