Chapter 7: Magnum Router GUI Manager

___________________________________________________________________

It is at this time that the Send Config can be canceled by clicking No and going back to the appropriate section of the Magnum Router Manager and applying any fixes necessary, or this warning can be ignored by pressing Yes.

If Yes was selected, the following screen will appear:

Click Send to send this configuration to the Magnum Router, or click Cancel to return to the Magnum Router main screen.

If Send was selected, the message bar on the screen will send informational messages to inform the user of the current status of the configuration being sent.

When the configuration send has completed, the Magnum Router main screen will be shown.

Reboot the Magnum Router

Select this button to activate a new configuration on the Magnum Router.

This can also be accessed by pressing ALT-R, and is also available as Reboot Router from the System menu.

The Reboot Router button will ONLY be available if the Magnum Router Manager is logged onto a Magnum Router.

The final step in the configuration process is to reboot the Magnum Router. The previously sent configuration has not been activated. A configuration on the Magnum Router is activated only when the unit is powered-up or rebooted.

7-28

Page 72
Image 72
Marathon MAGNUM ROUTER manual Magnum Router GUI Manager, Reboot the Magnum Router