Marathon MAGNUM ROUTER Changing a Master WAN-IP Address Entry, Deleting a Master WAN-IP Entry

Chapter 7: Magnum Router GUI Manager

___________________________________________________________________

Adding a Master WAN-IP Address Entry

To add an entry in the Master WAN-IP screen, perform the following steps:

1.Click on New Entry or press ATL-N

2.Type in the Network Address, Subnet Mask and DLCI

3.Click Save Edit or press ALT-V

4.Click Exit Edit or press ALT-X

If you have more than one remote site to connect to, program a unique IP network number for each WAN sub-interface and map them to their respective unique DLCI number. (refer to chapter 9, sample 3)

Changing a Master WAN-IP Address Entry

It is possible to change an entry after it has been entered into the table. Follow these steps to change an entry:

1.Double-Click on the entry that needs modification in the table

2.Make any modifications required

3.Click on Save Edit or press ALT-V

4.Click on Exit Edit or press ALT-X

If this entry was selected by mistake and is not the one that needed modification, just click on the Exit Edit or press ALT-X.

Deleting a Master WAN-IP Entry

In some cases, an entry may need to be deleted. To do this, follow these steps:

1.Select an entry in the table.

2.Either click the Delete Entry button or press ALT-D.

3.A verification question is asked to make sure that this is the entry to delete, if it is, select Yes. Selecting No will return to the Master WAN-IP Address screen.

Repeat for each entry that is to be deleted.

7-11