Chapter 7: Magnum Router GUI Manager

___________________________________________________________________

Micro-Band Voice Over IP

The MVoIP function of the Magnum Router gives the ability to encapsulate any frame relay data that is supplied on any of the WAN ports into a routable IP packet that can be sent over any IP LAN environment (including the Internet).

Before programming any data into the MVoIP screen, certain requirements must be met. These requirements include having to have a WAN Configuration Map entry (See WAN Configuration in this chapter) using a DLCI between 900 and 989 that is mapped from any WAN port to the E1 port, and a WAN-IP Route Map entry for Frame Relay routing that also uses a DLCI that is between 900 and 989. In the Sample chapter there is configuration information that further defines the requirements and just exactly how to program the Magnum Router for MVoIP.

The MVoIP functionality of the Magnum Router is covered in more detail in chapter 8 with programming samples in chapter 9.

Add a NEW MVoIP entry into the configuration

Delete an MVoIP entry from the configuration

Save changes to the

Magnum Router

Manager

Exit this screen to the

Main Screen

Source MVoIP Address

MVoIP DLCI (Entered in the WAN Configuration screen)

Figure 22 - MVoIP Screen

Destination MVoIP

Address

Add documentation notes for each entry

7-19

Page 63
Image 63
Marathon MAGNUM ROUTER manual Magnum Router GUI Manager Micro-Band Voice Over IP, MVoIP Screen