Chapter 9: Sample Configurations
___________________________________________________________________
DLCI’s
When DLCI’s within the range of 900 through 989 are specified in the Magnum Router, referencing an output port of E1, the Magnum Router will automatically encapsulate any traffic on the referenced input port (such as M1). However, if any of the DLCI’s from 900 to 989 are used to connect one WAN port to another (such as WAN1 to M1), the Magnum Router will treat that connection just like any other PVC connection.
Also note that when using the Microband VoIP features, the CIR should be set the same as the clock speed on the M1 port. The default clock speed on M1 is 128K.
Master WAN IP Address
When configuring the Magnum Routers for Microband VoIP, there is no need to assign a serial IP address in the Master WAN IP address table. The actual routing of any traffic is done through the Ethernet (E1 port).
WAN-IP Route Map Table
The following table shows the
Magnum A
