Chapter 7: Magnum Router GUI Manager
___________________________________________________________________
If all data entered is correct, click on Exit to close the DHCP screen. If not, correct the data and click on Save again.
To disable the DHCP server, click on the box next to Enable DHCP Server to remove the check and click on Save.
Multiple IP Addresses
In the case where there are multiple IP addresses entered in the Ethernet Configuration screen, and the DHCP server has already been configured then selecting an IP address that was not originally selected for DHCP use will cause an error.
As shown below, there are 2 IP addresses entered in the Ethernet Configuration screen, and 172.16.1.5 is currently highlighted.
Selecting the DHCP button will cause the following error (assuming that the DHCP server has already been programmed to use the IP address of 10.1.100.250)
