Marathon MAGNUM ROUTER Magnum Router GUI Manager WAN Config Button, WAN Configuration Screen

Chapter 7: Magnum Router GUI Manager

___________________________________________________________________

WAN Config Button

Click the WAN Config button on the Magnum Router Manager main screen, press ALT-W, or select WAN Configuration from the Settings menu to access the WAN Configuration screen.

In a frame relay environment, end-points are connected together via the use of PVC’s (Permanent Virtual Circuits). The WAN Configuration screen is where these PVC connections are created in the Magnum Router.

Add a NEW WAN entry into the configuration

Delete a WAN entry from the configuration

Save changes to the Magnum Router

Manager

Exit this screen and return to the Main

Screen

Add an IP address to the WAN port of the Magnum Router

Add IP routing information for the WAN

DLCI number fields

Add documentation notes for each entry

Select the Frame Relay

OUTPUT Port

Select the Frame Relay

INPUT Port

Figure 17 - WAN Configuration Screen

Whether to treat this connection a as multiplexed DLCI (Virtual) or as a pass- thru DLCI

The Commited

Information Rate of the

Frame Relay Circuit

7-7