Basic adjustment
Analogue setting | Sound sys. | E Sort | |
Channel positions can be sorted freely. | |||
You can reconfigure the analogue TV channels |
| ||
Select the optimum sound systems (broadcasting | 1 Press c/dto select “Yes”, and then press ;. | ||
settings automatically or manually. | systems) to receive (“B/G”, “D/K”, “I”, “L/L’”). | 2 Press a/b/c/dto select the channel you | |
E Additional search | |||
Label | want to move, and then press ;. | ||
Use this menu to add new services automatically | 3 Press a/b/c/dto move it to the desired | ||
| |||
after “Analogue search” in the “Auto installation” | When a TV channel sends its network name, the | position, and then press ;. | |
menu has been completed. | 4 Repeat steps 2 and 3 until all desired channels | ||
“Auto installation” detects the information and | |||
• Start searching channels after selecting the colour | |||
assigns a name to it. However, you can change | are sorted. | ||
system and sound system. | |||
channel names individually. | E Erase programme | ||
E Manual adjust | |||
Select each character of the new name for the | Channels can be erased individually. | ||
Use this menu to set up analogue TV channels | |||
channel with using the software keyboard (Page 14). | 1 Press c/dto select “Yes”, and then press ;. | ||
manually. | |||
NOTE | |||
After selecting “Yes” on the screen, press | 2 Press a/b/c/dto select the channel you | ||
• The name can be five characters or less. | |||
a/b/c/dto select the channel you want to | want to erase, and then press ;. | ||
| |||
set and then press ;. | Skip | • A message window pops up. | |
Fine |
| 3 Press c/dto select “Yes”, and then press | |
Channels with “Skip” set to “On” are passed over | ;to erase the selected channel. All the | ||
You can adjust the frequency to the desired position. | when using :r/s even if selected while watching | subsequent channels move up. | |
the image from the TV. | 4 Repeat steps 2 and 3 until all desired channels | ||
NOTE | |||
Lock | are erased. | ||
• Adjust while checking the background picture as a | |||
| |||
reference. | You can block the viewing of any channel. |
| |
• You can set by directly entering the frequency number |
| ||
of the channel with 0_9 numeric buttons. | NOTE |
| |
EXAMPLE |
| ||
• See “PIN” for setting a PIN. |
| ||
• 179.25 MHz: Press 1 > 7 > 9 > 2 > 5. | • When “Lock” is set to “On” for a channel, “Child lock |
| |
• 49.25 MHz: Press 4 > 9 > 2 > 5 > ;. | has been activated” displays, and the image and sound |
| |
Colour sys. | of the channel are blocked. |
| |
• When pressing 6 while “Child lock has been activated” |
| ||
Select the optimum colour system to receive | displays, the PIN input window will display. Inputting |
| |
the correct PIN unlocks the “PIN” temporarily until the |
| ||
(“Auto”, “PAL”, “SECAM”). | power is turned off. |
|
43