Sharp LC-80LE857K How to operate USB-recording, Buttons for USB-recording operation, Rec E

Other useful features

How to operate USB-recording

You can enjoy DTV/SAT recording or playback by connecting a commercially available USB HDD to the TV.

CAUTION

•Do not unplug the AC cord or turn off the MAIN POWER switch during USB-recording timer setting or USB- recording.

•When the AC cord is unplugged and the MAIN POWER

switch is turned off:

− The USB-recording timer setting is cancelled.

•USB-recording may be automatically stopped when signal reception is poor.

•Only this TV can playback the programme recorded on the USB HDD connected to this TV. The programmes cannot playback on other TV or PC.

•When a CAM PIN code is required for recording a programme, it is necessary to enter the CAM PIN code in advance (Page 12).

SHARP corporation bears no responsibility regarding compensation for content when recording cannot does not take place, loss of recorded data or other direct or indirect damages related to these matters. Please be forewarned.

EButtons for USB-recording operation

Remote control unit Control panel

Buttons	Description
	Displays the list of the programmes
	recorded by USB-recording.
	Start recording the programme you are
	watching.
REC E	• You cannot playback the recorded
	programme until several seconds
	after pressing REC E to start
	recording.
REC STOP H	Stop recording.
I	Playback the recorded programme.
	Stop the programme in playback and
H	go back to the real time broadcast
	(live).
	Pause the programme in playback
F	(USB-recording continues).
	• This function is released in 15
	minutes.
	Reverse (each time you press this

Sbutton, the reverse speed changes in three levels).

Fast forward (each time you press this

Jbutton, the fast forward speed changes in three levels).

KJump backward to the previous chapter point*.

LJump forward to the next chapter point*.

	Playback will resume after jumping
a	backward by the time interval you set
	in “Jump time setting” (Page 54).
	Playback will resume after jumping
b	forward by the time interval you set in
	“Jump time setting” (Page 54).

* Chapter points are fixed at 10 minute increments.

NOTE

•Refer to Regarding “Select recording device” (Page 31), when the buttons for USB-recording do not work.

•Instead of pressing buttons on the remote control unit, most of the operations shown to the left are also available on the screen with the control panel. You can call up this control panel by pressing CONTROL on the remote control unit or select “Control (USB REC)” from “TV Menu” > “Setup” > “Option” > “Option for view”.

•The “Audio description setting” menu does not work during USB-recording playback.

•USB-recording stops if no operation detected for three hours.

•When recording operations are not stopped manually, recording will automatically stop after six hours.

•To release USB-recording, press REC STOP H, change the DTV/SAT channel or change “INPUT”.

•Some functions do not work during USB-recording.

•USB-recording does not start automatically, but starts only when REC E is pressed or when a USB-recording timer setting is started.

•The PIN is required when you use the buttons such as S, J, K, L, a, bif you set the PIN and any options for “Parental rating” except “None” are selected.

•Do not disconnect the USB-HDD used for USB- recording during USB-recording operation.

•MHP services do not work during USB-recording playback (858 series only).

52