Sharp LC-80LE857K Using the 3D glasses Before using the 3D Glasses, Attaching the Nose Pad

Enjoying 3D image viewing

Using the 3D glasses

Before using the 3D Glasses

Before using the 3D glasses for the first time, remove the insulating sheet attached to them.

Attaching the Nose Pad

Attach either of the supplied nose pads as needed (such as when the glasses do not fit properly). The glasses come with a large and small nose pad.

Removing the nose pad Attaching the nose pad

Using the 3D glasses

Pairing the 3D glasses

To view 3D images, it is necessary to pair the 3D glasses and TV.

•To confirm pairing of the 3D glasses and TV, make sure that 3D images are displayed on the TV screen.

•When the power button is pressed for 2 or more seconds with the power off, pairing with the TV starts. When pairing is completed successfully, the LED blinks in green for 3 seconds.

•To switch between 2D and 3D modes, briefly press the power button.

50 cm–2 m

Switching to 3D and 2D Mode

When viewing 3D images, you can press the power button to switch between 2D and 3D modes. This is useful when several people are viewing 3D images on the same TV with some people wanting to watch in 3D and some people wanting to watch in 2D.

EViewing 2D images

When you press and hold for less than 2 seconds while viewing 3D images, the LED light blinks in red and the 3D images switch to 2D images.

EViewing 3D images

When you press and hold for less than 2 seconds while viewing 2D images, the LED light blinks in green and the 2D images switch to 3D images.

Usage Range of the 3D Glasses

The 3D glasses can be used by receiving a signal sent from the TV.

The 3D glasses turn off automatically after 15 seconds if no signal is received from the TV.

EOperating range

From directly the TV: approx. 5 m (within approx. 30° horizontally and 20° vertically)

NOTE

•When paired, make sure that the 3D glasses are kept at a distance of 50 cm–2 m from the TV. If too close, pairing cannot be performed.

70