Appendix
Reset the PIN
1Go to “TV Menu” > “Setup”.
2Press a/bto select “Auto installation”, “Programme setup”, “PIN”,
“Parental rating” or “Reset”, and then press ;. The PIN input window will display.
3Press and hold both :r and i+ on the TV simultaneously until the message appears on the screen.
NOTE
•When the PIN code is reset, the default PIN code (“1234”) is set.
•The PIN is also available for the Net TV function.
Reset
If complex adjustments are made so that the settings cannot be restored to normal, you can reset the settings to the factory preset values.
1Go to “TV Menu” > “Setup” > “View setting” > “Reset”.
2Press c/dto select “Yes”, and then press ;.
•“Now, TV will restart automatically, OK?” displays on the screen.
3Press c/dto select “Yes”, and then press ;.
•“Now initialising...” displays on the screen and blinks.
•After the reset has completed, the power shuts off and then comes back on. The screen will have returned to its original settings.
NOTE
•PIN input is required when executing “Reset”. The default PIN is “1234”. To change the PIN setting, refer to Individual setting — PIN (Page 44). To reset the PIN setting (PIN input will no longer be needed), refer to Reset the PIN shown above.
•“Reset” is greyed out in 3D mode. To select the “Reset” menu, you need to switch to 2D mode.
79