Sharp TINSEA548WJQZ, BD-HP70U, 10P03-CH-NG Secondary Audio, Audio Out, Dynamic Range Control

SETTINGS

Secondary Audio

This toggles the clicking sound on the menu and audio with secondary video in picture in picture mode for BD-Video.

•Select “Off” when enjoying the high quality sounds of BD- Video.

Item

On, Off

Audio Out

You can set the audio output when connecting to SURROUND equipment.

1This sets the audio output connected to SURROUND equipment.

Item

HDMI Output: Select this when you connect using HDMI OUT terminal.

Digital Output: Select this when you connect using DIGITAL AUDIO OUT terminal (OPTICAL).

2ch Audio Output: Select this when you do not use SURROUND sound equipment.

2You can set the audio output mode for each output terminal.

1This sets the audio output mode for HDMI OUT terminal when selecting “HDMI Output”.

NOTE

•When the secondary audio is set to “On”, PCM is automatically selected as the audio output mode.

2This sets the audio output mode for DIGITAL AUDIO OUT (OPTICAL terminal) when selecting “Digital Output”.

Item

Bitstream:	•	Select this when connecting to
		SURROUND equipment with
		a built-in decoder for DOLBY
		DIGITAL, etc.
	•	Setting to Bitstream will output
		each audio signal by Bitstream.
PCM:	•	Select this when connecting to 2
		channel stereo audio equipment.
	•	Setting to PCM will output by
		converting each audio signal into
		PCM 2 channel audio signal.

NOTE

•See page 62 for information on output of next generation audio formats.

Dynamic Range Control

This lets you adjust the range between the loudest and softest sounds (dynamic range) for playback at average volume. Use this when it is hard to hear dialog.

Item

Normal: The same audio output range is played as the original recorded audio output range.

Shift*: When Dolby Digital audio is played back, the dynamic range of the audio is adjusted so that the dialog portion can be heard easily. (If the audio sounds abnormal, set to “Normal”.)

Auto: When you play back audio in the Dolby TrueHD format, the dynamic range is automatically adjusted.

Item

Bitstream:

PCM (Surround):

•Select this when connecting to HDMI equipment with a built-in decoder for DOLBY DIGITAL, etc.

•Setting to Bitstream will output each audio signal by Bitstream.

•Select this when connecting to multi-channel HDMI equipment.

•Setting to PCM (Surround) will output by LINEAR PCM by decoding audio signals recorded in each audio output mode such as

DOLBY DIGITAL, DTS.

*Lower the audio volume before setting. If you do not do so, the speakers may emit a loud sound or excessive output may be applied to the speakers.

50