Sharp 10P03-CH-NG, BD-HP70U USB Memory Management, Before using the USB memory device

SETTINGS

Before using the USB memory device		2		Press HOME to display the menu screen.
		3 Press a/b to select “Settings”, then press d or
CAUTION:		4		ENTER.
				Press a/b to select “USB Memory Management”,
• Do not remove the USB memory device or unplug
	the AC cord while the operations for “USB Memory			then press d or ENTER.
	Management” or “Software Update (Manual Update			• “No USB Memory” appears when no USB memory is
	from USB memory device)” are being performed.				inserted.
•	Do not use a USB extension cable when connecting a	5 Press a/b to select “Erase” or “Format”, then
	USB memory device to the USB1 or USB2 terminal on
				press ENTER.
	the player.
	− Using a USB extension cable may prevent the player			Erase: Deletes only BD-VIDEO data written on the USB
	from performing correctly.
					memory device such as BD-LIVE data.
NOTE:				Format: Be aware that all data including BD-VIDEO data
					and software update data will be deleted.
•	SHARP cannot guarantee that all brands’ USB memory
	devices will operate with this player.			• If you want to delete only the unneeded software
•	Only USB memory devices formatted with FAT 32/16
					update data after the software is updated, delete the
	are compatible.
					data on the USB memory device using a PC.
	When formatting a USB memory device using a PC,
	perform the following settings.
	Format File System: FAT32
	Allocation Unit Size: Default Allocation Size
					Erase	Erases BD-VIDEO data on USB memory.
						Erase all contents on USB memory
USB Memory Management					Format
						including protected contents.
The following instructions explain how to delete data
such as the Virtual Package data and the BD-LIVE
data in a USB memory device.			NOTE
		•	Data which has been saved to the player’s internal memory
			(game score, etc.) will also be deleted.

6 Press a/b to select “Yes”, then press ENTER.

• A confirmation message is displayed. Check that the correct USB memory device is displayed, and then continue.

When you insert or remove a USB memory device, be sure to turn the main power off and make sure that “Quick Start” is set to “No” (See page 51).

1Insert the USB memory device into the USB1 or USB2 terminal on this player.

•When the wireless LAN adapter is not inserted into the USB1 terminal on the rear of the player, it is recommended that the USB memory device be connected to the USB1 terminal.

NOTE

•A USB memory device can be used with either the USB1 or USB2 terminal. When two USB memory devices are connected to both terminals at the same time, in certain situations the USB1 terminal may give priority to Local Storage and “Erase” and “Format” are not available for the USB memory device connected to the USB2 terminal.

Rear

USB memory device

7Start the process.

• The screen for the current operation will display.

Complete

OK

8Press ENTER.

Settings

57