Sharp LC-37HV4M operation manual Simple button operations for changing channels, Channel display

Page 18

Watching TV

Simple button operations for changing channels

You can change channels in several ways.

Using CHa/bon the remote control unit

•Press CHato increase channel number.

•Press CHbto decrease channel number.

NOTE

•CHs/ron the Display operates the same as CHb/aon the remote control unit.

CHs/r

Using 0 – 9 on the remote control unit

Select the channels directly by pressing buttons 0 to 9.

a

To select a 1-digit channel (e.g. channel 2):

•Press 2. If “2” is indicated and the picture does not change, press oto switch over to the 1-digit select mode and press 2 again.

To select a 2-digit channel (e.g. channel 12):

•Press o to set the 2-digit select mode. Press 1, followed by 2.

NOTE

•Complete this procedure within 3 seconds, otherwise the selection will not be made on the 2-digit channel mode.

When viewing Teletext information

View a page directly which is 3-digit page number from 100 to 899 by pressing buttons 0 to 9. With Teletext, you do not use o. (See page 64).

Channel display

Channel display changes approximately after 3 seconds as shown below.

SAT.1

12

PAL

B/G

(Example)

SAT.1

12

MONO

Using Flashback (A) on the remote control unit

Press A to switch the currently tuned channel to the previously tuned channel.

Press A again to switch back to the currently tuned channel.

17

Image 18

Contents LC-37HV4M Contents LC-37HV4MImportant Safety Precautions Dear Sharp customerImportant Safety Precautions Precautions when transporting the DisplaySupplied accessories Preparation Attaching the speakersExample Attaching right speaker Preparation How to secure from overturningSecuring from overturning Secure the stand on a platform or the floorWhere to place the System Setting the System in placeRemoving the terminal cover Setting the SystemConnecting the system cable and the AC cord to the Display AVC System rear viewCable clamp Small Closing the terminal coverCable clamp Large Cables come out from the small openingUsing an optional bracket to mount the Display Setting the Display on the wallSetting the AVC System with the stand Hanging on the wallUsing the remote control unit Inserting the batteriesPart names DisplayAVC System Part namesRemote control unit Watching TV Connecting to an antennaConnecting to the power outlet Basic connectionTurning on the power Turning off the powerWatching TV Using 0 9 on the remote control unit Using Flashback a on the remote control unitUsing CHa/bon the remote control unit Simple button operations for changing channelsUsing eon the remote control unit Simple button operation for changing volume/soundChanging the volume MuteWatching TV Using hon the remote control unit SRS sound optionsWatching TV Using Sound on the remote control unit PC input mode menu items Basic adjustment settingsAV input mode menu items List of AV menu items to help you with operationsPress a/bto select Password, and then press Enter Auto installationBasic adjustment settings Press c/dto select Yes, and then pressAutomatic channel searching Automatic channel labellingAutomatic channel sorting Auto search Programme setupPress a/b to select Programme Setup, and then press Enter Press a/bto select Auto Search, and then press EnterPress a/b to select Manual Adjust, Basic adjustment settings Manual setting for each channelProgramme Setup Manual menu Then press EnterSearch tuning Fine tuningColour system menu Colour systemLabelling channels Labelling menuSkip menu Setting the child lockSkipping channels Lock menuBasic adjustment settings Sort Press a/ b to select Programme SetupSort menus AV Input mode Language setting for on-screen displayPC Input mode Press a/bto select Language, and then press EnterRed Picture adjustmentsSelected item Cbutton Dbutton Contrast GreenPress a/b to select C.M.S., and then press Enter Basic adjustment settings S. Colour Management SystemPress a/bto select Advanced, and then press Enter Press a/bto select C.M.S., and then pressPress a/bto select Black, and then press Basic adjustment settings Colour temperature BlackPress a/bto select Colour Temp, and then press Enter Press a/bto select the desired level, and then press EnterBasic adjustment settings Monochrome Film modeDNR Digital Noise Reduction Basic adjustment settings SettingPress a/ bto select I/P Setting, and then Press a/bto select DNR, and then pressAudio adjustment Sound adjustmentSurround Power Control Power control for AV sourcePower save Press c/d to select Enable, and then Press Enter No signal OffPress a/b to select No Signal Off, and then press Enter No operation OffPress a/bto select Power Management, and then press Enter Basic adjustment settings Power Control for PC sourcePower management Press Menu and the PC Menu screen displaysUsing external equipment AVC System front viewFor INPUT1 signal DVD player Using external equipmentConnecting a DVD player Watching a DVD imageWatching a VCR image Connecting a VCRFor INPUT2 signal Displaying a VCR imageWatching broadcasts via an Hdtv tuner Connecting an Hdtv tunerFor INPUT3 signal Displaying broadcasts via an Hdtv tunerConnecting a game console or camcorder Enjoying a game console and viewing camcorder imagesDisplaying an image of the game console or camcorder Viewing an image from a PC Connecting a PCSignal names for 15-pin mini D-sub connecter Displaying an image from a PCHow to connect the speaker cable Connecting external speakersWhen using external speakers Make sure to connect the speaker jack and cableUsing external equipment Selecting speakers Press a/b to select Speaker, and then press EnterUseful adjustment settings Image position AV input mode onlyDescription Useful adjustment settings Moving the picture on the screenFor automatically adjusting the PC image Auto Sync. adjustment PC input mode onlyFine Sync. adjustment PC input mode only PhaseInput signal source Input signal settingInput selection Signal system of your equipment, and then Colour system setting AV input mode onlyAV mode selection Press a/b to select Colour System, and then press EnterWide mode for AV input mode Manual SelectionAuto Selection Wide mode for PC input mode Press a/bto select the desired input signal on the display Input signal PC input mode onlyPress a/bto select Input Signal and then press Enter ExampleWSS signal 43 screen Mode Normal Wide screen signalling WSS AV input mode onlyPicture aspect ratio AV input mode only Press a/bto select WSS, and then pressRotate AV input modePC input mode You can set the orientation of the picturePress a/bto select Audio Out, and then press Enter Sleep timerAudio out Press c/d to select Fixed or Variable, and then press EnterCool climate Press a/bto select Cool Climate, and then press EnterPassword setting for child lock TV mode only Setting a passwordClearing the password Useful features Dual screen functionsDual screen Update the still image by pressing Enter Teletext language settingUseful features Picture and still image Press d to exit still imageTeletext mode Useful featuresWhat is Teletext? Teletext functionTOP Overview screen Useful features Displaying SubpagesDisplaying TOP Overview Subpage screenUseful features Time display Troubleshooting Problem Possible SolutionAppendix 640g400 85 Hz 720g400 70 Hz 640g480 60 Hz 65 Hz PC compatibility chartAppendix 72 Hz 75 Hz 85 Hz 800g600 56 Hz 60 Hz 832g624 74.5 HzRS-232C port specifications PC Control of the SystemCommands Response code format37oLCD Colour TV, ModelLC-37HV4M SpecificationsOptional accessories Part name Part numberDimensional drawings DisplayDimensional drawings HOW to SET the Factory Presets Press a/bto select Auto Installation Press EnterSharp Corporation